Site icon Paul Bennett's Downeast Thunder Creations

DIY 2018 X-Carve 1000mm Table (FREE PLANS)

1000mm X-Carve Table

The video below will show you how I built my 4’ x 5’ x 35” table for my 2018, 1000mm X-Carve machine from Inventables. I designed this table specifically for my new machine and it features a very stiff/flat torsion box top. It also has a large roll-out tray underneath. This build is entirely plywood, and I used approximately 4 sheets of ¾” cabinet grade ply for most of it. The top is ¾” A/C Ext. Fir – only because I already had it.

The plans I offer in pdf are not what I would call “complete” as they do not contain all the notes and dimensions I might normally include when I put out plans for the general public. This is because I produced these for myself to use as a general guide while working in the shop, and I did not need a fully complete set of drawings. That being said, a savvy person should easily be able to figure out how to build this type of table without the additional information I might normally include, simply by watching the video and then comparing the video with the drawings. Sorry – there is no materials list or cut list included here.

The configuration and dimensions used were determined by the size and dimensions of my new, Inventables 1000mm X-Carve machine space requirements. The small size of my shop requires all equipment to be mobile, and that’s why I built the table with locking swivel casters.

The following items were purchased from Harbor Freight Tools: (4) 3” locking swivel casters. I don’t have the item number, but they are typically $3.99 each. (3) 1-1/2” swivel casters, item #41519. (16) 5/8” roller ball bearings, item #’s 37032 or 482017.

Construction took place using Kreg pocket hole screws, Titebond II wood glue, and a variety of 1-1/4”, 1-1/2”, and 2” deck screws.

FREE PLANS HERE: 

DIY X-Carve Table Plans

Many thanks to all my subscribers for participating, commenting, liking, and sharing my videos. I very much appreciate your continued support of my YouTube channel. It’s a lot of fun for me, and I hope this trend continues.

If you are not a subscriber, enter now so you’ll have a chance of winning one of my random drawing giveaways! No purchase is necessary. All that is required is that you are one of my subscribers, to have a chance at becoming a giveaway winner. Your privacy settings must be set to public though in order for your name to show among my subscribers listing, otherwise it will be hidden, and I won’t know you are a subscriber – and as such, you won’t be included in the drawing.

Here’s the video:

Exit mobile version